Covered deck above a lake with the decking removed and the floor joists exposed during a rebuild

Framing & Structural Repairs

Rot repair, load-bearing wall removal, earthquake retrofits, and framing for additions and remodels, managed start to finish by a licensed general contractor.

Get a Free Estimate

Services

What We Fix and Frame

  • Dry rot and water-damaged framing repair
  • Load-bearing wall removal and new beams
  • Earthquake retrofitting and foundation bolting
  • Sagging floors, joists, posts, and beams
  • New door and window openings
  • Framing for additions and remodels

The Work

Structural Work Starts With Finding the Cause

Rot, sagging, and cracks are symptoms. Before anything is cut out, we track down what caused it: a leak, poor drainage, an undersized beam, or a missing connection. That way the repair fixes the problem instead of covering it up. Structural changes are engineered and permitted where required, then framed and inspected before the walls are closed.

Photos

Reciprocating saw cutting out a rotted section of wood wall framing
Cutting out rotted framing to make way for new lumber
Back of a house after a rotted deck and stairs were torn out, with a worker preparing the ground below
Before: rotted deck and stairs torn out
New deck and staircase with dark railings leading up to a back door
After: new deck, stairs, and railing
Wall framing by Capps Construction
Wall framing in progress
Roof truss framing by Capps Construction
Roof truss framing
Interior framing with plumbing rough-in by Capps Construction
Interior framing with plumbing roughed in
Rebar cage and footing trench for a structural wall cut into a slope beside an existing deck
Rebar tied for a structural wall beside an existing deck
Rolling gate with a black steel frame and horizontal wood slats
Finished gate: steel frame with horizontal wood slats
Finished garage with a coated floor, wall cabinets, a workbench and a glass overhead door
Finished garage with a coated floor and built-in storage

Good to Know

Structural Work in Del Mar: What to Know First

Repair in Kind or Change

Repair that keeps the same outside dimensions and surfaces is generally exempt from Del Mar's design review, and City staff make that call. Structural work is still permitted and inspected where required. Changes to the outside of the house go through review first.

Where Coastal Rot Starts

Near the ocean, rot usually starts where water gets behind flashing: at deck connections, window sills, door thresholds, and the bottoms of posts. Damp marine air keeps wet wood from drying out. We trace the water to its source, so the repair does not rot again.

Earthquake Retrofits

Many older California homes were built before houses were bolted to their foundations. A retrofit adds anchor bolts and plywood bracing in the crawl space. California's Earthquake Brace + Bolt program offers grants toward this work for older wood-framed homes on raised foundations in eligible ZIP codes, and we can help you check yours.

The City makes the final call on every project. Outside Del Mar the rules differ by city, and we check yours before we price the job.

How It Works

From Inspection to Closed Walls

Every project is managed start to finish by a licensed general contractor, with a trusted team of licensed trade partners and one point of contact.

We Find the Cause

We look at the damage, open up what needs opening, and track the problem to its source.

Engineering, Scope, and Price

Structural changes are engineered where required. You get a written scope and price for the repair and for fixing the cause.

Repair, Inspect, Close Up

Damaged framing comes out, new framing and hardware go in, the work is inspected, and the walls and finishes are closed back up.

FAQ

Framing and Structural Questions, Answered

How do I know if a wall is load-bearing?
You often cannot tell by looking. Clues are walls that run across the ceiling joists, walls near the center of the house, and walls with posts or beams above or below them. We check the framing in the attic and crawl space before anything is removed, and an engineer sizes the new beam.
What causes dry rot, and how is it fixed?
Rot is a fungus that grows in wood that stays damp. The usual sources are leaking flashing, failed caulk or paint, sprinklers hitting the house, and poor drainage. The fix is to stop the water, cut out all the damaged wood, replace it with treated or properly protected lumber, and flash it so it stays dry.
Does structural repair need a permit?
Usually, yes. Replacing or altering beams, posts, joists, bearing walls, or foundations is structural work, and it is engineered, permitted, and inspected where required. In Del Mar, repair that keeps the same outside dimensions is generally exempt from design review, but the building permit still applies.
What is an earthquake retrofit?
It ties the house to its foundation so it does not slide or rack in an earthquake. On older homes with a crawl space, that means anchor bolts through the sill into the foundation and plywood bracing on the short walls under the floor. California's Earthquake Brace + Bolt program offers grants for this in eligible ZIP codes.
My floor sags or bounces. What does that mean?
Usually undersized or damaged joists, a post or pier that has settled, or rot where the framing meets the foundation. Most of the time it can be fixed from the crawl space with new posts, beams, or joists set beside the old ones. We find the cause first, because the right repair depends on it.

Seeing Rot, Sagging, or Cracks?

We work in Del Mar, Solana Beach and Carmel Valley. Get in touch for a free estimate. We'll take a look, explain what's going on, and give you a straight answer on scope and cost.